需求：

• Barcode Professional for ASP.NET v3.0以上
• Microsoft .NET 框架（所有版本）

由于条件的限制，条码显示位置有限，那么就需要懂得规定的区域内显示条码方法。今天将给大家简单介绍如何在规定区域内显示条码。

【Barcode Professional for ASP.NET下载】

我们知道在Barcode Professional有GetBarcodeImage()方法，而这种方法可以通过barsAreaSizeInInches参数实现规定区域内条码的显示。现在我们需注意以下三点：

• 规定区域的尺寸位置（条码宽和高）
• 规定目标区域的宽（包括条码加上左右Quiet Zones 区域的宽）
• 规定目标区域的高（条码栏高度）

假定：编码的数据是1234567890，使用128代码，以300DPI呈现，可供条码显示的位置面积是1*0.5英寸.

参考代码：

VB

Private Sub SaveBarcode()
'Create a Barcode Professional object
Dim bcp As New Neodynamic.WebControls.BarcodeProfessional.BarcodeProfessional()
'Set the barcode symbology to Code 128
bcp.Symbology = Neodynamic.WebControls.BarcodeProfessional.Symbology.Code128
'Set the value to encode
bcp.Code = "1234567890"
'Barcode dimensions settings
bcp.BarHeight = 1.0F
bcp.BarWidth = 0.01F
'Resolution
Dim dpi As Single = 300.0F
'Target size in inches
Dim targetArea As New System.Drawing.SizeF(1.0F, 0.5F)
'Get the barcode image fitting the target area
Dim imgBarcode As System.Drawing.Image = bcp.GetBarcodeImage(dpi, targetArea)
'Save it on disk in PNG format
imgBarcode.Save("C:\temp\barcode128.png", System.Drawing.Imaging.ImageFormat.Png)
imgBarcode.Dispose()
End Sub

C#

private void SaveBarcode()
{
//Create a Barcode Professional object
Neodynamic.WebControls.BarcodeProfessional.BarcodeProfessional bcp = new Neodynamic.WebControls.BarcodeProfessional.BarcodeProfessional();
//Set the barcode symbology to Code 128
bcp.Symbology = Neodynamic.WebControls.BarcodeProfessional.Symbology.Code128;
//Set the value to encode
bcp.Code = "1234567890";
//Barcode dimensions settings
bcp.BarHeight = 1.0f;
bcp.BarWidth = 0.01f;
//Resolution
float dpi = 300.0f;
//Target size in inches
System.Drawing.SizeF targetArea = new System.Drawing.SizeF(1.0f, 0.5f);
//Get the barcode image fitting the target area
System.Drawing.Image imgBarcode = bcp.GetBarcodeImage(dpi, targetArea);
//Save it on disk in PNG format
imgBarcode.Save(@"C:\temp\barcode128.png", System.Drawing.Imaging.ImageFormat.Png);
imgBarcode.Dispose();
}

需要注意的是目标宽度是整个条码栏宽度加上左右两边的Quiet Zones (QuietZoneWidth属性 )，然而目标区域高度仅仅只是条码栏的高度，可参考下图（前面代码生成）。

如果只想条码布满整个目标区域，需要将QuietZoneWidth属性设置为0（即除去左右两边的边距）DisplayCode属性设置为False（即隐藏可读文本），可参考下列代码

VB

Private Sub SaveBarcode()
'Create a Barcode Professional object
Dim bcp As New Neodynamic.WebControls.BarcodeProfessional.BarcodeProfessional()
'Set the barcode symbology to Code 128
bcp.Symbology = Neodynamic.WebControls.BarcodeProfessional.Symbology.Code128
'Set the value to encode
bcp.Code = "1234567890"
'Barcode dimensions settings
bcp.BarHeight = 1.0F
bcp.BarWidth = 0.01F
bcp.QuietZoneWidth = 0
bcp.DisplayCode = False
'Resolution
Dim dpi As Single = 300.0F
'Target size in inches
Dim targetArea As New System.Drawing.SizeF(1.0F, 0.5F)
'Get the barcode image fitting the target area
Dim imgBarcode As System.Drawing.Image = bcp.GetBarcodeImage(dpi, targetArea)
'Save it on disk in PNG format
imgBarcode.Save("C:\temp\barcode128_full.png", System.Drawing.Imaging.ImageFormat.Png)
imgBarcode.Dispose()
End Sub

C#

private void SaveBarcode()
{
//Create a Barcode Professional object
Neodynamic.WebControls.BarcodeProfessional.BarcodeProfessional bcp = new Neodynamic.WebControls.BarcodeProfessional.BarcodeProfessional();
//Set the barcode symbology to Code 128
bcp.Symbology = Neodynamic.WebControls.BarcodeProfessional.Symbology.Code128;
//Set the value to encode
bcp.Code = "1234567890";
//Barcode dimensions settings
bcp.BarHeight = 1.0f;
bcp.BarWidth = 0.01f;
bcp.QuietZoneWidth = 0;
bcp.DisplayCode = false;
//Resolution
float dpi = 300.0f;
//Target size in inches
SizeF targetArea = new System.Drawing.SizeF(1.0f, 0.5f);
//Get the barcode image fitting the target area
System.Drawing.Image imgBarcode = bcp.GetBarcodeImage(dpi, targetArea);
//Save it on disk in PNG format
imgBarcode.Save(@"C:\temp\barcode128_full.png", System.Drawing.Imaging.ImageFormat.Png);
imgBarcode.Dispose();
}